FotoPlayer.com RSS feeder

Tuscan

Fri, 16 Dec 2011 12:01:49 GMT

Date:Fri, 16 Dec 2011 12:01:49 GMT
Album Category:Columns/Cap and Base/
Click here to view album containing this image.

Bead

Fri, 16 Dec 2011 12:01:47 GMT

Date:Fri, 16 Dec 2011 12:01:47 GMT
Album Category:Columns/Cap and Base/
Click here to view album containing this image.

OGEE Cap & Base

Fri, 16 Dec 2011 12:01:48 GMT

Date:Fri, 16 Dec 2011 12:01:48 GMT
Album Category:Columns/Cap and Base/
Click here to view album containing this image.

Modern Cap & Base

Fri, 16 Dec 2011 12:01:48 GMT

Date:Fri, 16 Dec 2011 12:01:48 GMT
Album Category:Columns/Cap and Base/
Click here to view album containing this image.

Craftsman Cap & Base

Fri, 16 Dec 2011 12:01:47 GMT

Date:Fri, 16 Dec 2011 12:01:47 GMT
Album Category:Columns/Cap and Base/
Click here to view album containing this image.

Round Smooth Tapered

Fri, 16 Dec 2011 12:01:49 GMT

Date:Fri, 16 Dec 2011 12:01:49 GMT
Album Category:Columns/Fiberglass/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: n/a PACKAGED: 1 per box, KD STYLES: Round Tapered FG Column SIZES: MCF-200108060 6.25” X 7.625” x 60.00” MCF-200108072 6.25” X 7.625” x 72.00” MCF-200108096 6.25” X 7.625” x 96.00” MCF-200108108 6.25” X 7.625” x 108.00” MCF-200108120 6.25” X 7.625” x 120.00” MCF-200110060 7.50” X 9.625” x 60.00” MCF-200110096 7.50” X 9.625” x 96.00” MCF-200110108 7.50” X 9.625” x 108.00” MCF-200110120 7.50” X 9.625” x 120.00” MCF-200110144 7.50” X 9.625” x 144.00” MCF-200112096 9.25” X 11.625” x 96.00” MCF-200112108 9.25” X 11.625” x 108.00” MCF-200112120 9.25” X 11.625” x 120.00” MCF-200112144 9.25” X 11.625” x 144.00” **Other sizes are available upon request. **Lead Times will vary depending on size ordered. INSTALLATION: Column is a single piece. Does not wrap around. FEATURES: Fiberglass Material. Will not rot. This is a load bearing Column: Ultimate Load 6,500lbs. ]]>

Round Non-Tapered Fluted

Fri, 16 Dec 2011 12:01:49 GMT

Date:Fri, 16 Dec 2011 12:01:49 GMT
Album Category:Columns/Fiberglass/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: n/a PACKAGED: 1 per box, KD STYLES: Round Non-Tapered Fluted FG Column SIZES: MCF-200008108 8” x 108.00” MCF-200008120 8” x 120.00” **Other sizes are available upon request. **Lead Times will vary depending on size ordered. INSTALLATION: Column is a single piece. Does not wrap around. FEATURES: Fiberglass Material. Will not rot. Column has full height flutes. This is a load bearing Column: Ultimate Load 6,500lbs.]]>

Round Tapered Fluted

Fri, 16 Dec 2011 12:01:50 GMT

Date:Fri, 16 Dec 2011 12:01:50 GMT
Album Category:Columns/Fiberglass/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: n/a PACKAGED: 1 per box, KD STYLES: Round Tapered Fluted FG Column SIZES: MCF-200508072 6.25” X 7.625” x 72.00” MCF-200508096 6.25” X 7.625” x 96.00” MCF-200508120 6.25” X 7.625” x 120.00” MCF-200510096 7.50” X 9.625” x 96.00” MCF-200510120 7.50” X 9.625” x 120.00” MCF-200510144 7.50” X 9.625” x 144.00” MCF-200512096 9.25” X 11.625” x 96.00” MCF-200512120 9.25” X 11.625” x 120.00” MCF-200512144 9.25” X 11.625” x 144.00” **Other sizes are available upon request. **Lead Times will vary depending on size ordered. INSTALLATION: Column is a single piece. Does not wrap around. FEATURES: Fiberglass Material. Will not rot. Column has full height flutes. This is a load bearing Column: Ultimate Load. ]]>

Square Raised Panel (42")

Fri, 16 Dec 2011 12:01:53 GMT

Date:Fri, 16 Dec 2011 12:01:53 GMT
Album Category:Columns/PVC Wraps/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: n/a PACKAGED: 1 per box, KD STYLES: Square - Raised Panel, Ogee Plunged routed SIZES: MCC-103306072 5.50” x 5.50” x 72.00” MCC-103306096 5.50” x 5.50” x 96.00” MCC-103306108 5.50” x 5.50” x 108.00” MCC-103306120 5.50” x 5.50” x 120.00” MCC-103308072 7.50” x 7.50” x 72.00” MCC-103308096 7.50” x 7.50” x 96.00” MCC-103308108 7.50” x 7.50” x 108.00” MCC-103308120 7.50” x 7.50” x 120.00” MCC-103308144 7.50” x 7.50” x 144.00” MCC-103310072 9.50” x 9.50” x 72.00” MCC-103310096 9.50” x 9.50” x 96.00” MCC-103310108 9.50” x 9.50” x 108.00” MCC-103310120 9.50” x 9.50” x 120.00” MCC-103310144 9.50” x 9.50” x 144.00” MCC-103312072 11.50” x11.50” x 72.00” MCC-103312096 11.50” x11.50” x 96.00” MCC-103312108 11.50” x11.50” x 108.00” MCC-103312120 11.50” x11.50” x 120.00” MCC-103312144 11.50” x11.50” x 144.00” **Other sizes are available upon request. **Lead Times will vary depending on size ordered. INSTALLATION: Some framing may be necessary. If column is to accept a railing system, all railing installation screws must be mounted into a structural internal post (not incl.). FEATURES: Cellular PVC Material. Will not rot. Mitred edge allow easy installation around existing posts. Raised Panel has a break to provide a flat mounting surface for mounting a 42” high railing system. Column Wrap is NOT load bearing. ]]>

Square Raised Panel (36")

Fri, 16 Dec 2011 12:01:53 GMT

Date:Fri, 16 Dec 2011 12:01:53 GMT
Album Category:Columns/PVC Wraps/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: n/a PACKAGED: 1 per box, KD STYLES: Square - Raised Panel, Ogee Plunged routed SIZES: MCC-103206072 5.50” x 5.50” x 72.00” MCC-103206096 5.50” x 5.50” x 96.00” MCC-103206108 5.50” x 5.50” x 108.00” MCC-103206120 5.50” x 5.50” x 120.00” MCC-103208072 7.50” x 7.50” x 72.00” MCC-103208096 7.50” x 7.50” x 96.00” MCC-103208108 7.50” x 7.50” x 108.00” MCC-103208120 7.50” x 7.50” x 120.00” MCC-103208144 7.50” x 7.50” x 144.00” MCC-103210072 9.50” x 9.50” x 72.00” MCC-103210096 9.50” x 9.50” x 96.00” MCC-103210108 9.50” x 9.50” x 108.00” MCC-103210120 9.50” x 9.50” x 120.00” MCC-103210144 9.50” x 9.50” x 144.00” MCC-103212072 11.50” x11.50” x 72.00” MCC-103212096 11.50” x11.50” x 96.00” MCC-103212108 11.50” x11.50” x 108.00” MCC-103212120 11.50” x11.50” x 120.00” MCC-103212144 11.50” x11.50” x 144.00” **Other sizes are available upon request. **Lead Times will vary depending on size ordered. INSTALLATION: Some framing may be necessary. If column is to accept a railing system, all railing installation screws must be mounted into a structural internal post (not incl.). FEATURES: Cellular PVC Material. Will not rot. Mitred edge allow easy installation around existing posts. Raised Panel has a break to provide a flat mounting surface for mounting a 36” high railing system. Column Wrap is NOT load bearing. ]]>

Square Raised Panel

Fri, 16 Dec 2011 12:01:52 GMT

Date:Fri, 16 Dec 2011 12:01:52 GMT
Album Category:Columns/PVC Wraps/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: n/a PACKAGED: 1 per box, KD STYLES: Square - Raised Panel, Ogee Plunged routed SIZES: MCC-103106072 5.50” x 5.50” x 72.00” MCC-103106096 5.50” x 5.50” x 96.00” MCC-103106108 5.50” x 5.50” x 108.00” MCC-103106120 5.50” x 5.50” x 120.00” MCC-103108072 7.50” x 7.50” x 72.00” MCC-103108096 7.50” x 7.50” x 96.00” MCC-103108108 7.50” x 7.50” x 108.00” MCC-103108120 7.50” x 7.50” x 120.00” MCC-103108144 7.50” x 7.50” x 144.00” MCC-103110072 9.50” x 9.50” x 72.00” MCC-103110096 9.50” x 9.50” x 96.00” MCC-103110108 9.50” x 9.50” x 108.00” MCC-103110120 9.50” x 9.50” x 120.00” MCC-103110144 9.50” x 9.50” x 144.00” MCC-103112072 11.50” x11.50” x 72.00” MCC-103112096 11.50” x11.50” x 96.00” MCC-103112108 11.50” x11.50” x 108.00” MCC-103112120 11.50” x11.50” x 120.00” MCC-103112144 11.50” x11.50” x 144.00” **Other sizes are available upon request. **Lead Times will vary depending on size ordered. INSTALLATION: Some framing may be necessary. If column is to accept a railing system, all railing installation screws must be mounted into a structural internal post (not incl.). FEATURES: Cellular PVC Material. Will not rot. Mitred edge allow easy installation around existing posts. Raised Panel, is formed by plunge routing an Ogee profile in solid material. Column Wrap is NOT load bearing. ]]>

Square Tapered Plain

Fri, 16 Dec 2011 12:01:53 GMT

Date:Fri, 16 Dec 2011 12:01:53 GMT
Album Category:Columns/PVC Wraps/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: n/a PACKAGED: 1 per box, KD STYLES: Square - Plain Tapered SIZES: MCC-151012048 7.50” x 11.50” x 48.00” MCC-151012054 7.50” x 11.50” x 54.00” MCC-151012060 7.50” x 11.50” x 60.00” MCC-151012066 7.50” x 11.50” x 66.00” MCC-151012072 7.50” x 11.50” x 72.00” MCC-151012096 7.50” x 11.50” x 96.00” MCC-151016048 10.50” x 15.50” x 48.00” MCC-151016054 10.50” x 15.50” x 54.00” MCC-151016060 10.50” x 15.50” x 60.00” MCC-151016066 10.50” x 15.50” x 66.00” MCC-151016072 10.50” x 15.50” x 72.00” MCC-151016096 10.50” x 15.50” x 96.00” MCC-151020048 12.50” x 19.50” x 48.00” MCC-151020054 12.50” x 19.50” x 54.00” MCC-151020060 12.50” x 19.50” x 60.00” MCC-151020066 12.50” x 19.50” x 66.00” MCC-151020072 12.50” x 19.50” x 72.00” MCC-151020096 12.50” x 19.50” x 96.00” MCC-151024048 15.50” x 23.50” x 48.00” MCC-151024054 15.50” x 23.50” x 54.00” MCC-151024060 15.50” x 23.50” x 60.00” MCC-151024066 15.50” x 23.50” x 66.00” MCC-151024072 15.50” x 23.50” x 72.00” MCC-151024096 15.50” x 23.50” x 96.00” **Other sizes are available upon request. **Lead Times will vary depending on size ordered. INSTALLATION: Some framing may be necessary. If column is to accept a railing system, all railing installation screws must be mounted into a structural internal post (not incl.). FEATURES: Cellular PVC Material. Will not rot. Mitred edge allow easy installation around existing posts. Column wrap is tapered. Column Wrap is NOT load bearing. ]]>

Square Tapered Raised Panel

Fri, 16 Dec 2011 12:01:54 GMT

Date:Fri, 16 Dec 2011 12:01:54 GMT
Album Category:Columns/PVC Wraps/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: n/a PACKAGED: 1 per box, KD STYLES: Square - Raised Panel, Ogee Plunged routed, Tapered Column SIZES: MCC-152112048 7.50” x 11.50” x 48.00” MCC-152112054 7.50” x 11.50” x 54.00” MCC-152112060 7.50” x 11.50” x 60.00” MCC-152112066 7.50” x 11.50” x 66.00” MCC-152112072 7.50” x 11.50” x 72.00” MCC-152112096 7.50” x 11.50” x 96.00” MCC-152116048 10.50” x 15.50” x 48.00” MCC-152116054 10.50” x 15.50” x 54.00” MCC-152116060 10.50” x 15.50” x 60.00” MCC-152116066 10.50” x 15.50” x 66.00” MCC-152116072 10.50” x 15.50” x 72.00” MCC-152116096 10.50” x 15.50” x 96.00” MCC-152120048 12.50” x 19.50” x 48.00” MCC-152120054 12.50” x 19.50” x 54.00” MCC-152120060 12.50” x 19.50” x 60.00” MCC-152120066 12.50” x 19.50” x 66.00” MCC-152120072 12.50” x 19.50” x 72.00” MCC-152120096 12.50” x 19.50” x 96.00” MCC-152124048 15.50” x 23.50” x 48.00” MCC-152124054 15.50” x 23.50” x 54.00” MCC-152124060 15.50” x 23.50” x 60.00” MCC-152124066 15.50” x 23.50” x 66.00” MCC-152124072 15.50” x 23.50” x 72.00” MCC-152124096 15.50” x 23.50” x 96.00” **Other sizes are available upon request. **Lead Times will vary depending on size ordered. INSTALLATION: Some framing may be necessary. If column is to accept a railing system, all railing installation screws must be mounted into a structural internal post (not incl.). FEATURES: Cellular PVC Material. Will not rot. Mitred edge allow easy installation around existing posts. Column wrap is tapered. Column Wrap is NOT load bearing. ]]>

Square Fluted (36")

Fri, 16 Dec 2011 12:01:51 GMT

Date:Fri, 16 Dec 2011 12:01:51 GMT
Album Category:Columns/PVC Wraps/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: n/a PACKAGED: 1 per box, KD STYLES: Square - Fluted, with flat panel to accept a 36” high railing. nt color='#FFD100'>SIZES: MCC-102206072 5.50” x 5.50” x 72.00” MCC-102206096 5.50” x 5.50” x 96.00” MCC-102206108 5.50” x 5.50” x 108.00” MCC-102206120 5.50” x 5.50” x 120.00” MCC-102208072 7.50” x 7.50” x 72.00” MCC-102208096 7.50” x 7.50” x 96.00” MCC-102208108 7.50” x 7.50” x 108.00” MCC-102208120 7.50” x 7.50” x 120.00” MCC-102208144 7.50” x 7.50” x 144.00” MCC-102210072 9.50” x 9.50” x 72.00” MCC-102210096 9.50” x 9.50” x 96.00” MCC-102210108 9.50” x 9.50” x 108.00” MCC-102210120 9.50” x 9.50” x 120.00” MCC-102210144 9.50” x 9.50” x 144.00” MCC-102212072 11.50” x11.50” x 72.00” MCC-102212096 11.50” x11.50” x 96.00” MCC-102212108 11.50” x11.50” x 108.00” MCC-102212120 11.50” x11.50” x 120.00” MCC-102212144 11.50” x11.50” x 144.00” **Other sizes are available upon request. **Lead Times will vary depending on size ordered. INSTALLATION: Some framing may be necessary. If column is to accept a railing system, all railing installation screws must be mounted into a structural internal post (not incl.). FEATURES: Cellular PVC Material. Fluted Column has a break to provide a flat mounting surface for mounting a 36” high railing system. Will not rot. Mitred edge allow easy installation around existing posts. Column Wrap is NOT load bearing. ]]>

Square Fluted (42")

Fri, 16 Dec 2011 12:01:51 GMT

Date:Fri, 16 Dec 2011 12:01:51 GMT
Album Category:Columns/PVC Wraps/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: n/a PACKAGED: 1 per box, KD STYLES: Square - Fluted, with flat panel to accept a 42” high railing. SIZES: MCC-102306072 5.50” x 5.50” x 72.00” MCC-102306096 5.50” x 5.50” x 96.00” MCC-102306108 5.50” x 5.50” x 108.00” MCC-102306120 5.50” x 5.50” x 120.00” MCC-102308072 7.50” x 7.50” x 72.00” MCC-102308096 7.50” x 7.50” x 96.00” MCC-102308108 7.50” x 7.50” x 108.00” MCC-102308120 7.50” x 7.50” x 120.00” MCC-102308144 7.50” x 7.50” x 144.00” MCC-102310072 9.50” x 9.50” x 72.00” MCC-102310096 9.50” x 9.50” x 96.00” MCC-102310108 9.50” x 9.50” x 108.00” MCC-102310120 9.50” x 9.50” x 120.00” MCC-102310144 9.50” x 9.50” x 144.00” MCC-102312072 11.50” x11.50” x 72.00” MCC-102312096 11.50” x11.50” x 96.00” MCC-102312108 11.50” x11.50” x 108.00” MCC-102312120 11.50” x11.50” x 120.00” MCC-102312144 11.50” x11.50” x 144.00” **Other sizes are available upon request. **Lead Times will vary depending on size ordered. INSTALLATION: Some framing may be necessary. If column is to accept a railing system, all railing installation screws must be mounted into a structural internal post (not incl.). FEATURES: Cellular PVC Material. Fluted Column has a break to provide a flat mounting surface for mounting a 42” high railing system. Will not rot. Mitred edge allow easy installation around existing posts. Column Wrap is NOT load bearing. ]]>

Square Plain

Fri, 16 Dec 2011 12:01:51 GMT

Date:Fri, 16 Dec 2011 12:01:51 GMT
Album Category:Columns/PVC Wraps/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: n/a PACKAGED: 1 per box, KD STYLES: Square - Smooth SIZES: MCC-101006072 5.50” x 5.50” x 72.00” MCC-101006096 5.50” x 5.50” x 96.00” MCC-101006108 5.50” x 5.50” x 108.00” MCC-101006120 5.50” x 5.50” x 120.00” MCC-101008072 7.50” x 7.50” x 72.00” MCC-101008096 7.50” x 7.50” x 96.00” MCC-101008108 7.50” x 7.50” x 108.00” MCC-101008120 7.50” x 7.50” x 120.00” MCC-101008144 7.50” x 7.50” x 144.00” MCC-101010072 9.50” x 9.50” x 72.00” MCC-101010096 9.50” x 9.50” x 96.00” MCC-101010108 9.50” x 9.50” x 108.00” MCC-101010120 9.50” x 9.50” x 120.00” MCC-101010144 9.50” x 9.50” x 144.00” MCC-101012072 11.50” x11.50” x 72.00” MCC-101012096 11.50” x11.50” x 96.00” MCC-101012108 11.50” x11.50” x 108.00” MCC-101012120 11.50” x11.50” x 120.00” MCC-101012144 11.50” x11.50” x 144.00” **Other sizes are available upon request. **Lead Times will vary depending on size ordered. INSTALLATION: Some framing may be necessary. If column is to accept a railing system, all railing installation screws must be mounted into a structural internal post (not incl.). FEATURES: Cellular PVC Material. Will not rot. Mitred edge allow easy installation around existing posts. Column Wrap is NOT load bearing. ]]>

Square Fluted

Fri, 16 Dec 2011 12:01:52 GMT

Date:Fri, 16 Dec 2011 12:01:52 GMT
Album Category:Columns/PVC Wraps/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: n/a PACKAGED: 1 per box, KD STYLES: Square - Fluted SIZES: MCC-102106072 5.50” x 5.50” x 72.00” MCC-102106096 5.50” x 5.50” x 96.00” MCC-102106108 5.50” x 5.50” x 108.00” MCC-102106120 5.50” x 5.50” x 120.00 MCC-102108072 7.50” x 7.50” x 72.00” MCC-102108096 7.50” x 7.50” x 96.00” MCC-102108108 7.50” x 7.50” x 108.00” MCC-102108120 7.50” x 7.50” x 120.00” MCC-102108144 7.50” x 7.50” x 144.00” MCC-102110072 9.50” x 9.50” x 72.00” MCC-102110096 9.50” x 9.50” x 96.00” MCC-102110108 9.50” x 9.50” x 108.00” MCC-102110120 9.50” x 9.50” x 120.00” MCC-102110144 9.50” x 9.50” x 144.00” MCC-102112072 11.50” x11.50” x 72.00” MCC-102112096 11.50” x11.50” x 96.00” MCC-102112108 11.50” x11.50” x 108.00” MCC-102112120 11.50” x11.50” x 120.00” MCC-102112144 11.50” x11.50” x 144.00” **Other sizes are available upon request. **Lead Times will vary depending on size ordered. INSTALLATION: Some framing may be necessary. If column is to accept a railing system, all railing installation screws must be mounted into a structural internal post (not incl.). FEATURES: Cellular PVC Material. Will not rot. Mitred edge allow easy installation around existing posts. Fluted Column full height. ]]>

Window Header - 9" Classic Dentil

Fri, 16 Dec 2011 12:00:43 GMT

Date:Fri, 16 Dec 2011 12:00:43 GMT
Album Category:Window Headers/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: EXWH973DK PACKAGED: 1 per box (keystone included) STYLES: Moulded Window Header - 9" height Dentil Panel color='#FFD100'>SIZES: 9” x 33.625” Flat Profile 9” x 37.625” Flat Profile 9” x 43.625” Flat Profile 9” x 65.625” Flat Profile 9” x 73.625” Flat Profile Keystone Included with all window headers. INSTALLATION: Window Headers have a base plate to allow the face to snap on. Header is cut down to two equal length halves to fit the desired size. Base plates are installed on the wall and then face plate snap on. A Keystone mounting plate is screwed over the exposed joint which then received the keystone (included) which snaps on. No exposed fasteners. FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. Easy to install features. 9” Height. Classic Dentil Panel Profile. Two piece construction consist of a ase mounting plate which allows the face to “snap-on”. No Exposed fasteners. Can be cut down to fit exact requirement. Keystone Included is used to cover exposed joint. ]]>

Keystone- Classic Dentil

Fri, 16 Dec 2011 12:00:44 GMT

Date:Fri, 16 Dec 2011 12:00:44 GMT
Album Category:Window Headers/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: EXWH6KEYD EXWH9KEYD PACKAGED: 1 per box (keystone included) STYLES: Classic Dentil Keystone - 6" or 9" INSTALLATION: Surface Mount, Fiber cement compatible FEATURES: Suitable for installation over brick, stucco, fiber cement, vinyl, or wood siding.]]>

Window Header - 6" Classic Dentil

Fri, 16 Dec 2011 12:00:43 GMT

Date:Fri, 16 Dec 2011 12:00:43 GMT
Album Category:Window Headers/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: EXWH33DK EXWH37DK EXWH43DK EXWH65DK EXWH73DK PACKAGED: 1 per box (keystone included) STYLES: Moulded Window Header - 6" height Dentil Panel SIZES: 6” x 33.625” Flat Profile 6” x 37.625” Flat Profile 6” x 43.625” Flat Profile 6” x 65.625” Flat Profile 6” x 73.625” Flat Profile Keystone Included with all window headers. INSTALLATION: Window Headers have a base plate to allow the face to snap on. Header is cut down to two equal length halves to fit the desired size. Base plates are installed on the wall and then face plate snap on. A Keystone mounting plate is screwed over the exposed joint which then received the keystone (included) which snaps on. No exposed fasteners. FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. Easy to install features. 6” Height. Classic Dentil Panel Profile. Two piece construction consist of a ase mounting plate which allows the face to “snap-on”. No Exposed fasteners. Can be cut down to fit exact requirement. Keystone Included is used to cover exposed joint. ]]>

Keystone- Flat Panel

Fri, 16 Dec 2011 12:00:44 GMT

Date:Fri, 16 Dec 2011 12:00:44 GMT
Album Category:Window Headers/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: EXWH6KEY EXWH9KEY PACKAGED: 1 per box (keystone included) STYLES: Flat Panel Keystone - 6" or 9" INSTALLATION: Surface Mount, Fiber cement compatible FEATURES: Suitable for installation over brick, stucco, fiber cement, vinyl, or wood siding.]]>

Window Header - 9" Flat Panel

Fri, 16 Dec 2011 12:00:43 GMT

Date:Fri, 16 Dec 2011 12:00:43 GMT
Album Category:Window Headers/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: EXWH933K EXWH937K EXWH943K EXWH965K EXWH973K PACKAGED: 1 per box (keystone included) STYLES: Moulded Window Header - 9" height Flat Panel SIZES: 9” x 33.625” Flat Profile 9” x 37.625” Flat Profile 9” x 43.625” Flat Profile 9” x 65.625” Flat Profile 9” x 73.625” Flat Profile 9” x 128.00” Flat Profile Keystone Included with all window headers. INSTALLATION: Window Headers have a base plate to allow the face to snap on. Header is cut down to two equal length halves to fit the desired size. Base plates are installed on the wall and then face plate snap on. A Keystone mounting plate is screwed over the exposed joint which then received the keystone (included) which snaps on. No exposed fasteners. FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. Easy to install features. 9” Height. Classic Flat Panel Profile. Two piece construction consist of a ase mounting plate which allows the face to “snap-on”. No Exposed fasteners. Can be cut down to fit exact requirement. Keystone Included is used to cover exposed joint. ]]>

Window Header - 6" Flat Panel

Fri, 16 Dec 2011 12:00:43 GMT

Date:Fri, 16 Dec 2011 12:00:43 GMT
Album Category:Window Headers/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: EXWH33K EXWH37K EXWH43K EXWH65K EXWH73K PACKAGED: 1 per box (keystone included) STYLES: Moulded Window Header - 6" height Flat Panel SIZES: 6” x 33.625” Flat Profile 6” x 37.625” Flat Profile 6” x 43.625” Flat Profile 6” x 65.625” Flat Profile 6” x 73.625” Flat Profile Keystone Included with all window headers. INSTALLATION: Window Headers have a base plate to allow the face to snap on. Header is cut down to two equal length halves to fit the desired size. Base plates are installed on the wall and then face plate snap on. A Keystone mounting plate is screwed over the exposed joint which then received the keystone (included) which snaps on. No exposed fasteners. FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. Easy to install features. 6” Height. Classic Flat Panel Profile. Two piece construction consist of a ase mounting plate which allows the face to “snap-on”. No Exposed fasteners. Can be cut down to fit exact requirement. Keystone Included is used to cover exposed joint. ]]>

Pilaster Kit

Fri, 16 Dec 2011 12:00:03 GMT

Date:Fri, 16 Dec 2011 12:00:03 GMT
Album Category:Pilaster Kit/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: EXPIL PACKAGED: 1 kit per box STYLES: Moulded Pilaster Kit INSTALLATION: Pilasters can be cut down to accommodate door heights. Both Right & Left Pilasters install with a base plate first, Face place snaps over the base plate. All fasteners are concealed. Transition moulding supplied attached to bottom of selected Window Header to cover cut end of Pilaster Kit. FEATURES: Pilaster Kit can be installed with any Style of size window header. Pilaster kit has a Right and Left Pilaster to allow flush installation against door frames. Kit includes Right and Left Plinth blocks to finish the bottom of each pilaster. Kits accommodates door heights up to 96”, but is easily cut down to fit shorter door heights. Transition mouldings attach to the bottom of our Window Headers to accept the top cut end of the pilaster. Base plates are installed over siding or masonry, and the face snaps on concealing any fasteners. Pilaster Kit is available with an optional siding base in order to allow installation prior to siding installation. ]]>

Flat Panel Profile

Fri, 16 Dec 2011 12:00:02 GMT

Date:Fri, 16 Dec 2011 12:00:02 GMT
Album Category:Header Sunburst Kits/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: EXWHSB6922 EXWHSB6922 PACKAGED: 1 per box STYLES: Moulded Window Header Sunburst - Flats Profile SIZES: 36” – 69” Kit 69” – 106” Kit INSTALLATION: Kit consists of a modified Sunburst and a Right and Left Window Header section. Sunburst is installed on centre position, nail fin allows installation prior to siding, but wide face covers nail fin for clean surface installation. Right and Left Window Header Sections are trimmed on opposite ends to fit desired size . Header section each have a base plate which installs on wall and the face snaps over the base plate -No exposed fasteners. FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. Easy to install features. Moulded in levelling lines allow correct straight installation. ]]>

Classic Dentil Profile

Fri, 16 Dec 2011 12:00:01 GMT

Date:Fri, 16 Dec 2011 12:00:01 GMT
Album Category:Header Sunburst Kits/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: EXWHSB6922 EXWHSB6922 PACKAGED: 1 per box STYLES: Moulded Window Header Sunburst - Dentil Profile SIZES: 36” – 69” Kit 69” – 106” Kit INSTALLATION: Kit consists of a modified Sunburst and a Right and Left Window Header section. Sunburst is installed on centre position, nail fin allows installation prior to siding, but wide face covers nail fin for clean surface installation.]]>

Pentagon

Fri, 16 Dec 2011 12:02:02 GMT

Date:Fri, 16 Dec 2011 12:02:02 GMT
Album Category:Gable Vents/Custom Welded/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: GVC-PT2639 GVC-PT3450 PACKAGED: 1 per box STYLES: Welded Pentagon 26" x 39" 34" x 50" INSTALLATION: Has nail fin for installation prior to siding installation. Nail fin can be cut off for surface mounting. FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. These vents are fully functional. Pentagon vents incorporate three bafflling systems to resist water penetration. Nylon bug screen keeps insects out. Moulded in levelling lines allow correct straight installation. Removeable siding trim ring, acts as a template to aid siding cuts, and trim rough edge of siding. Product can be installed without trim ring if desired. Nail fin can be cut off to allow surface mounting. ]]>

Triangle

Fri, 16 Dec 2011 12:02:04 GMT

Date:Fri, 16 Dec 2011 12:02:04 GMT
Album Category:Gable Vents/Custom Welded/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: GVC-TR2652 GVC-TR1734 GVC-TR2656 GVC-TR2356 GVC-TR2362 GVC-TR2162 GVC-TR2070 GVC-TR1872 GVC-TR1770 GVC-TR1574 PACKAGED: 1 per box STYLES: Welded Triangle 26" x 52" 17" x 34" 26" x 56" 23" x 56" 23" x 62" 21" x 62.5" 20.5" x 70.5" 18" x 72.5" 17" x 70.5" 14.5 "x 74" INSTALLATION: Has nail fin for installation prior to siding installation. Nail fin can be cut off for surface mounting. FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. These vents are fully functional. Triangular vents incorporate three bafflling systems to resist water penetration. Nylon bug screen keeps insects out. Moulded in levelling lines allow correct straight installation. Removeable siding trim ring, acts as a template to aid siding cuts, and trim rough edge of siding. Product can be installed without trim ring if desired. Nail fin can be cut off to allow surface mounting. ]]>

Elongated Octagon

Fri, 16 Dec 2011 12:01:58 GMT

Date:Fri, 16 Dec 2011 12:01:58 GMT
Album Category:Gable Vents/Custom Welded/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: GVC-EO2638 GVC-EO2638 PACKAGED: 1 per box STYLES: Welded Octagon 26" x 38" 32" x 47" INSTALLATION: Has nail fin for installation prior to siding installation. Nail fin can be cut off for surface mounting. FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. These vents are fully functional. Octagon vents incorporate three bafflling systems to resist water penetration. Nylon bug screen keeps insects out. Moulded in levelling lines allow correct straight installation. Removeable siding trim ring, acts as a template to aid siding cuts, and trim rough edge of siding. Product can be installed without trim ring if desired. Nail fin can be cut off to allow surface mounting. ]]>

Diamond

Fri, 16 Dec 2011 12:01:59 GMT

Date:Fri, 16 Dec 2011 12:01:59 GMT
Album Category:Gable Vents/Custom Welded/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: GVC-DM3542 PACKAGED: 1 per box STYLES: Welded Diamond - 35" x 42" INSTALLATION: Has nail fin for installation prior to siding installation. Nail fin can be cut off for surface mounting. FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. These vents are fully functional. Diamond vents incorporate three bafflling systems to resist water penetration. Nylon bug screen keeps insects out. Moulded in levelling lines allow correct straight installation. Removeable siding trim ring, acts as a template to aid siding cuts, and trim rough edge of siding. Product can be installed without trim ring if desired. Nail fin can be cut off to allow surface mounting. ]]>

Horizontal Oval

Fri, 16 Dec 2011 12:02:02 GMT

Date:Fri, 16 Dec 2011 12:02:02 GMT
Album Category:Gable Vents/Custom Welded/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: GVC-OV2721 PACKAGED: 1 per box STYLES: Welded Horizontal Oval Vent STYLES: Net Free Vent Area: INSTALLATION: Has nail fin for installation prior to siding installation. Nail fin can be cut off for surface mounting. All oval sizes can accept optional Keystones. FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. These vents are fully functional. Oval vents incorporate three bafflling systems to resist water penetration. Nylon bug screen keeps insects out. Moulded in levelling lines allow correct straight installation. Removeable siding trim ring, acts as a template to aid siding cuts, and trim rough edge of siding. Product can be installed without trim ring if desired. Nail fin can be cut off to allow surface mounting. ]]>

Rectangular

Fri, 16 Dec 2011 12:02:03 GMT

Date:Fri, 16 Dec 2011 12:02:03 GMT
Album Category:Gable Vents/Custom Welded/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: GVC-RT3242 PACKAGED: 1 per box STYLES: Welded Rectangular - 32" x 42" INSTALLATION:> Has nail fin for installation prior to siding installation. Nail fin can be cut off for surface mounting. All rectangular sizes can accept optional Keystones. FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. These vents are fully functional. Rectangular vents incorporate three bafflling systems to resist water penetration. Nylon bug screen keeps insects out. Moulded in levelling lines allow correct straight installation. Removeable siding trim ring, acts as a template to aid siding cuts, and trim rough edge of siding. Product can be installed without trim ring if desired. Nail fin can be cut off to allow surface mounting.]]>

Octagon

Fri, 16 Dec 2011 12:02:01 GMT

Date:Fri, 16 Dec 2011 12:02:01 GMT
Album Category:Gable Vents/Custom Welded/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: GVC-OC40 PACKAGED: 1 per box STYLES: Welded Octagon Vent STYLES: Net Free Vent Area: 40” Octagon Vent INSTALLATION: Has nail fin for installation prior to siding installation. Nail fin can be cut off for surface mounting. All octagon sizes can accept optional Keystones. FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. These vents are fully functional. Octagon vents incorporate three bafflling systems to resist water penetration. Nylon bug screen keeps insects out. Moulded in levelling lines allow correct straight installation. Removeable siding trim ring, acts as a template to aid siding cuts, and trim rough edge of siding. Product can be installed without trim ring if desired. Nail fin can be cut off to allow surface mounting. ]]>

Rectangle

Fri, 16 Dec 2011 12:02:08 GMT

Date:Fri, 16 Dec 2011 12:02:08 GMT
Album Category:Gable Vents/Moulded/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: GVR18 GVR24 GVR30 PACKAGED: 1 per box STYLES: Moulded Rectangular Vent STYLES: Net Free Vent Area: 12” x 18” Rectangular Vent 18” x 24” Rectangular Vent 24” x 30” Rectangular Vent INSTALLATION: Has nail fin for installation prior to siding installation. Nail fin can be cut off for surface mounting. FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. These vents are fully functional. Rectangular vents incorporate three bafflling systems to resist water penetration. Nylon bug screen keeps insects out. Moulded in levelling lines allow correct straight installation. Removeable Siding Trim Ring, acts as a template to aid siding cuts, and trim rough edge of siding. Product can be installed without trim ring if desired. Nail fin can be cut off to allow surface mounting. ]]>

Round Top

Fri, 16 Dec 2011 12:02:11 GMT

Date:Fri, 16 Dec 2011 12:02:11 GMT
Album Category:Gable Vents/Moulded/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: GV22RT GV32RT PACKAGED: 1 per box STYLES: Moulded Half Round Vent STYLES: Net Free Vent Area: 14” x 22” Round Top Vent 22” x 32” Round Top Vent INSTALLATION: Has nail fin for installation prior to siding installation. Nail fin can be cut off for surface mounting. Oval vent can accept optional Keystones. FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. These vents are fully functional. Round top vents incorporate three bafflling systems to resist water penetration. Nylon bug screen keeps insects out. Moulded in levelling lines allow correct straight installation. Removeable Siding Trim Ring, acts as a template to aid siding cuts, and trim rough edge of siding. Product can be installed without trim ring if desired. Nail fin can be cut off to allow surface mounting. ]]>

Square

Fri, 16 Dec 2011 12:02:12 GMT

Date:Fri, 16 Dec 2011 12:02:12 GMT
Album Category:Gable Vents/Moulded/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: GV12 PACKAGED: 1 per box STYLES: Moulded Square Vent STYLES: Net Free Vent Area: 12" Square Vent INSTALLATION: Has nail fin for installation prior to siding installation. Nail fin can be cut off for surface mounting. FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in Polystyrene. These vents are fully functional. Square vents incorporate three bafflling systems to resist water penetration. Nylon bug screen keeps insects out. Moulded in levelling lines allow correct straight installation. Removeable Siding Trim Ring, acts as a template to aid siding cuts, and trim rough edge of siding. Product can be installed without trim ring if desired. Nail fin can be cut off to allow surface mounting. ]]>

Keystones

Fri, 16 Dec 2011 12:02:05 GMT

Date:Fri, 16 Dec 2011 12:02:05 GMT
Album Category:Gable Vents/Moulded/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: GVKEY PACKAGED: Set of 4-per box STYLES: Moulded Keystone Vent Accessory INSTALLATION: Easily screws on to face of vent frame though concealed mounting holes.]]>

Vertical Oval

Fri, 16 Dec 2011 12:02:08 GMT

Date:Fri, 16 Dec 2011 12:02:08 GMT
Album Category:Gable Vents/Moulded/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: GV2127OVL PACKAGED: 1 per box STYLES: Moulded Vertical Oval Vent STYLES: Net Free Vent Area: INSTALLATION: Has nail fin for installation prior to siding installation. Nail fin can be cut off for surface mounting. Oval vent can accept optional Keystones. FEATURES: Non-Paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. These vents are fully functional. Octagon vents incorporate three bafflling systems to resist water penetration. Nylon bug screen keeps insects out. Moulded in Levelling lines allow correct straight installation. Removeable Siding Trim Ring, acts as a template to aid siding cuts, and trim rough edge of siding. Product can be installed without trim ring if desired. Nail fin can be cut off to allow surface mounting. ]]>

Round

Fri, 16 Dec 2011 12:02:10 GMT

Date:Fri, 16 Dec 2011 12:02:10 GMT
Album Category:Gable Vents/Moulded/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: GVRND18 GVRND22 GVRND36 PACKAGED: 1 per box STYLES: Moulded Round Vent STYLES: Net Free Vent Area: 18” Round Vent 22” Round Vent 36” Round Vent INSTALLATION: Has nail fin for installation prior to siding installation. Nail fin can be cut off for surface mounting. All round sizes can accept optional Keystones FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. These vents are fully functional. Round vents incorporate three bafflling systems to resist water penetration. Nylon bug screen keeps insects out. Moulded in levelling lines allow correct straight installation. Removeable Siding Trim Ring, acts as a template to aid siding cuts, and trim rough edge of siding. Product can be installed without trim ring if desired. Nail fin can be cut off to allow surface mounting. ]]>

Designer Round

Fri, 16 Dec 2011 12:02:11 GMT

Date:Fri, 16 Dec 2011 12:02:11 GMT
Album Category:Gable Vents/Moulded/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: GVRND28 PACKAGED: 1 per box STYLES: Moulded Round Vent STYLES: Net Free Vent Area: 28” Round Designer Vent INSTALLATION: Has nail fin for installation prior to siding installation. Nail fin can be cut off for surface mounting. FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. These vents are fully functional. Round vents incorporate three bafflling systems to resist water penetration. Nylon bug screen keeps insects out. Moulded in levelling lines allow correct straight installation. Removeable Siding Trim Ring, acts as a template to aid siding cuts, and trim rough edge of siding. Product can be installed without trim ring if desired. Designer 28” round vent features an extra wide trim ring with moulded in Keystones. Nail fin can be cut off to allow surface mounting. ]]>

Half Round

Fri, 16 Dec 2011 12:02:05 GMT

Date:Fri, 16 Dec 2011 12:02:05 GMT
Album Category:Gable Vents/Moulded/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: GVHRD34 PACKAGED: 1 per box STYLES: Moulded Round Vent STYLES: Net Free Vent Area: INSTALLATION: Has nail fin for installation prior to siding installation. Nail fin can be cut off for Surface mounting. All Round Sizes can accept optional Keystones. FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. These vents are fully functional. Round vents incorporate three bafflling systems to resist water penetration. Nylon bug screen keeps insects out. Moulded in Levelling lines allow correct straight installation. Removeable Siding Trim Ring, acts as a template to aid siding cuts, and trim rough edge of siding. Product can be installed without trim ring if desired. Nail fin can be cut off to allow surface mounting. ]]>

Octagon

Fri, 16 Dec 2011 12:02:07 GMT

Date:Fri, 16 Dec 2011 12:02:07 GMT
Album Category:Gable Vents/Moulded/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: GVOCT18 GVOCT22 GVOCT27 GVOCT32 PACKAGED: 1 per box STYLES: Moulded Octagon Vent STYLES: Net Free Vent Area: 18” Octagon Vent 22” Octagon Vent 27” Octagon Vent 32” Octagon Vent INSTALLATION: Has nail fin for installation prior to siding installation. Nail fin can be cut off for surface mounting. All Octagon Sizes can accept optional Keystones. FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. These vents are fully functional. Octagon vents incorporate three bafflling systems to resist water penetration. Nylon bug screen keeps insects out. Moulded in levelling lines allow correct straight installation. Removeable Siding Trim Ring, acts as a template to aid siding cuts, and trim rough edge of siding. Product can be installed without trim ring if desired. Nail fin can be cut off to allow surface mounting. ]]>

Foundation Master Vent - Remodel w/Ring

Fri, 16 Dec 2011 12:02:16 GMT

Date:Fri, 16 Dec 2011 12:02:16 GMT
Album Category:Mounting Blocks Vents/Vents/
Click here to view album containing this image.

Foundation Master Vent - New w/o Ring

Fri, 16 Dec 2011 12:02:16 GMT

Date:Fri, 16 Dec 2011 12:02:16 GMT
Album Category:Mounting Blocks Vents/Vents/
Click here to view album containing this image.

Intake/Exhaust Vent

Fri, 16 Dec 2011 12:02:16 GMT

Date:Fri, 16 Dec 2011 12:02:16 GMT
Album Category:Mounting Blocks Vents/Vents/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: MMINEX PACKAGED: 1-per box *Can be broken at a premium STYLES: Intake / Exhaust Vent INSTALLATION: NOT for use with Dryers or Range hoods. Has multiple section plastic pipe to adjust to wall or soffit exhaust sources. Entire face removes to expose nailing flange on the base. FEATURES: For 4” Vent Pipes. Include mult-section plastic pipe. Features a full covered hood. Eliminates unsightly caulking around exhaust outlets. Eliminates time consuming trimming around openings. Conforms to siding with projections up to 1.25”. ]]>

6" Hooded Exhaust Vent

Fri, 16 Dec 2011 12:02:16 GMT

Date:Fri, 16 Dec 2011 12:02:16 GMT
Album Category:Mounting Blocks Vents/Vents/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: MM6HD PACKAGED: 1-per box *Can be broken at a premium STYLES: Exhaust Vent - 6” w/Hood INSTALLATION: Easy to install into 6” exhaust openings. Removable trim allows easy fastening to wall. Trim ring covers rough edge of siding. FEATURES: For 4” Vent Pipes. Includes 4” aluminum extension 8”. Features a full covered hood. Internal baffle flap opens with exhaust pressure. Eliminates unsightly caulking around exhaust outlets. Eliminates time consuming trimming around openings. Adjustable snap-on trim ring covers rough edge of siding. Conforms to siding with projections up to 1.25”. ]]>

Exhaust Vent Flaps - Square Corners

Fri, 16 Dec 2011 12:02:16 GMT

Date:Fri, 16 Dec 2011 12:02:16 GMT
Album Category:Mounting Blocks Vents/Vents/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: MMSQEV PACKAGED: 4-per box *Can be broken at a premium STYLES: Exhaust Vent - 4” with Flaps, Square Corners INSTALLATION: Easy to install into 4” exhaust openings. Removable trim allows easy fastening to wall. Trim ring covers rough edge of siding. FEATURES: For 4” Vent Pipes. Includes 4” aluminum extension 8”. Square corners on trim ring. Eliminates unsightly caulking around exhaust outlets. Eliminates time consuming trimming around openings. Has flaps that open with exhaust pressure and close without exhaust pressure. Adjustable snap-on trim ring covers rough edge of siding. Conforms to siding with projections up to 1.25”. ]]>

4" Hooded Exhaust Vent

Fri, 16 Dec 2011 12:02:16 GMT

Date:Fri, 16 Dec 2011 12:02:16 GMT
Album Category:Mounting Blocks Vents/Vents/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: MM4HD PACKAGED: 4-per box *Can be broken at a premium STYLES: Exhaust Vent - 4” w/Hood INSTALLATION: Easy to install into 4” exhaust openings. Removable trim allows easy fastening to wall. Trim ring covers rough edge of siding. FEATURES: For 4” Vent Pipes. Includes 4” aluminum extension 8”. Features a full covered hood. Internal baffle flap opens with exhaust pressure. Eliminates unsightly caulking around exhaust outlets. Eliminates time consuming trimming around openings. Adjustable snap-on trim ring covers rough edge of siding. Conforms to siding with projections up to 1.25”. ]]>

Exhaust Vent Flaps - Scalloped Corners

Fri, 16 Dec 2011 12:02:16 GMT

Date:Fri, 16 Dec 2011 12:02:16 GMT
Album Category:Mounting Blocks Vents/Vents/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: MMEV PACKAGED: 4-per box *Can be broken at a premium STYLES: Exhaust Vent - 4” with Flaps, Scalloped Corners INSTALLATION: Easy to install into 4” exhaust openings. Removable trim allows easy fastening to wall. Trim ring covers rough edge of siding. FEATURES: For 4” Vent Pipes. Includes 4” aluminum extension 8”. Scalloped corners on trim ring. Eliminates unsightly caulking around exhaust outlets. Eliminates time consuming trimming around openings. Has flaps that open with exhaust pressure and close without exhaust pressure. Adjustable Snap-on Trim ring covers rough edge of siding. Conforms to siding with projections up to 1.25”. ]]>

Surface Mounting Block - Dutch Lap

Fri, 16 Dec 2011 12:02:13 GMT

Date:Fri, 16 Dec 2011 12:02:13 GMT
Album Category:Mounting Blocks Vents/Mounting Blocks/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: MMSMDL PACKAGED: 10-per box *Can be broken at a premium STYLES: Moulded Fixture Mounting Block INSTALLATION: Block is mounted over siding. Conforms to 4” to 10” Dutch Lap / Cove siding. Internal caulking channel provides a means of a concealed caulking seal. FEATURES: Mounting surface dimension of: ?”x?”. Provides smooth mounting surface for fixtures installed with siding. Eliminates unsightly caulking around electrical receptacles. Eliminates time consuming trimming around electrical receptacles. Incorporates several cut out groves on back of face to allow easy adaptation to desired fixture. ]]>

Surface Mounting Block

Fri, 16 Dec 2011 12:02:15 GMT

Date:Fri, 16 Dec 2011 12:02:15 GMT
Album Category:Mounting Blocks Vents/Mounting Blocks/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: MMSM PACKAGED: 10-per box *Can be broken at a premium STYLES: Moulded Fixture Mounting Block INSTALLATION: Block is split to wrap around water/electrical pipes or conduits. Can be installed directly over electrical fixture or receptacle for correct placement. FEATURES: Mounting surface dimension of: ?”x?”. Provides smooth mounting surface for fixtures installed with siding. Eliminates unsightly caulking around electrical receptacles. Eliminates time consuming trimming around electrical receptacles. Incorporates several cut out groves on back of face to allow easy adaptation to desired fixture. Adjustable Snap-on trim ring covers rough edge of siding. Conforms to siding with projections up to ???”. ]]>

Jumbo Mounting Block

Fri, 16 Dec 2011 12:02:13 GMT

Date:Fri, 16 Dec 2011 12:02:13 GMT
Album Category:Mounting Blocks Vents/Mounting Blocks/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: MMJB PACKAGED: 10-per box *Can be broken at a premium STYLES: Moulded Fixture Mounting Block INSTALLATION: Block is mounted over siding. Conforms to 4” to 10” Dutch Lap / Cove siding. Internal caulking channel provides a means of a concealed caulking seal. FEATURES: Mounting surface dimension of: ?”x?”. Square corners on trim ring. Provides smooth mounting surface for fixtures installed with siding. Eliminates unsightly caulking around electrical receptacles. Eliminates time consuming trimming around electrical receptacles. Incorporates several cut out groves on back of face to allow easy adaptation to desired fixture. ]]>

Jumbo Mounting Block - Jumbo Recessed

Fri, 16 Dec 2011 12:02:14 GMT

Date:Fri, 16 Dec 2011 12:02:14 GMT
Album Category:Mounting Blocks Vents/Mounting Blocks/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: MMRJB PACKAGED: 10-per box *Can be broken at a premium STYLES: Moulded Fixture Mounting Block INSTALLATION: Face can be cut to adapt to requirement of fixture. Can be installed directly over electrical fixture or receptacle for correct placement. FEATURES: Mounting surface dimension of: ?”x?” Square Corners on trim ring. Mounting surface (face) is recessed against the wall to eliminate need to adjust position of electrical box. Provides smooth mounting surface for fixtures installed with siding. Eliminates unsightly caulking around electrical receptacles. Eliminates time consuming trimming around electrical receptacles. Incorporates several cut out groves on back of face to allow easy adaptation to desired fixture. Adjustable Snap-on Trim ring covers rough edge of siding. Conforms to siding with projections up to ???”. ]]>

Meter Mounting Block

Fri, 16 Dec 2011 12:02:14 GMT

Date:Fri, 16 Dec 2011 12:02:14 GMT
Album Category:Mounting Blocks Vents/Mounting Blocks/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: MMMTR PACKAGED: 6-per box *Can be broken at a premium STYLES: Moulded Fixture Mounting Block INSTALLATION: Easy to install before siding to provide flat surafec for mounting Electrical Meters. FEATURES: Mounting surface dimension of: ?”x?”. Square corners on trim ring. Has siding pocket but no removeable ring. Provides smooth mounting surface for fixtures installed with siding. Eliminates unsightly caulking around electrical receptacles. Eliminates time consuming trimming around electrical receptacles. Conforms to siding with projections up to ???”. ]]>

Mini Mounting Block - Split

Fri, 16 Dec 2011 12:02:15 GMT

Date:Fri, 16 Dec 2011 12:02:15 GMT
Album Category:Mounting Blocks Vents/Mounting Blocks/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: MMSPL PACKAGED: 10-per box *Can be broken at a premium STYLES: Moulded Fixture Mounting Block INSTALLATION: Block is split to wrap around water/electrical pipes or conduits. Can be installed directly over electrical fixture or receptacle for correct placement. FEATURES: Mounting surface dimension of: ?”x?”. Square corners on trim ring. Provides smooth mounting surface for fixtures installed with siding. Eliminates unsightly caulking around electrical receptacles. Eliminates time consuming trimming around electrical receptacles. Incorporates several cut out groves on back of face to allow easy adaptation to desired fixture. Adjustable Snap-on trim ring covers rough edge of siding. Conforms to siding with projections up to ???”. ]]>

Recessed Mini Mounting Block - Pre-cut

Fri, 16 Dec 2011 12:02:14 GMT

Date:Fri, 16 Dec 2011 12:02:14 GMT
Album Category:Mounting Blocks Vents/Mounting Blocks/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: MMRMINI PACKAGED: 10-per box *Can be broken at a premium STYLES: Moulded Fixture Mounting Block FD100'>INSTALLATION: Pre-cut face to accommodate electrical receptacle. Can be installed directly over electrical fixture or receptacle for correct placement. FEATURES: Mounting surface dimension of: ?”x?”. Decorative scalloped corners on trim ring. Provides smooth mounting surface for fixtures installed with siding. Eliminates unsightly caulking around electrical receptacles. Eliminates time consuming trimming around electrical receptacles. Incorporates several cut out groves on back of face to allow easy adaptation to desired fixture. Adjustable Snap-on Trim ring covers rough edge of siding. Conforms to siding with projections up to ???”. ]]>

Original Mounting Block - Square Corners

Fri, 16 Dec 2011 12:02:14 GMT

Date:Fri, 16 Dec 2011 12:02:14 GMT
Album Category:Mounting Blocks Vents/Mounting Blocks/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: MMMB PACKAGED: 10-per box *Can be broken at a premium STYLES: Moulded Fixture Mounting Block INSTALLATION: Face can be cut to adapt to requirement of fixture. Can be installed directly over electrical fixture or receptacle for correct placement. FEATURES: Mounting surface dimension of: 5”x6”. Square corners on trim ring. Provides smooth mounting surface for fixtures installed with siding. Eliminates unsightly caulking around electrical receptacles. Eliminates time consuming trimming around electrical receptacles. Incorporates several cut out groves on back of face to allow easy adaptation to desired fixture. Adjustable snap-on trim ring covers rough edge of siding. Conforms to siding with projections up to 1.25”. ]]>

Square Mounting Block - Square Recessed

Fri, 16 Dec 2011 12:02:15 GMT

Date:Fri, 16 Dec 2011 12:02:15 GMT
Album Category:Mounting Blocks Vents/Mounting Blocks/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: MMRSQ PACKAGED: 10-per box *Can be broken at a premium STYLES: Moulded Fixture Mounting Block 100'>INSTALLATION: Face can be cut to adapt to requirement of fixture. Can be installed directly over electrical fixture or receptacle for correct placement. FEATURES: Mounting surface dimension of: ?”x?”. Square corners on trim ring. Provides smooth mounting surface for fixtures installed with siding. Eliminates unsightly caulking around electrical receptacles. Eliminates time consuming trimming around electrical receptacles. Incorporates several cut out groves on back of face to allow easy adaptation to desired fixture. Adjustable Snap-on Trim ring covers rough edge of siding. Conforms to siding with projections up to ???”. ]]>

Large Mounting Block - Large Recessed

Fri, 16 Dec 2011 12:02:14 GMT

Date:Fri, 16 Dec 2011 12:02:14 GMT
Album Category:Mounting Blocks Vents/Mounting Blocks/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: MMRLQ PACKAGED: 10-per box *Can be broken at a premium STYLES: Moulded Fixture Mounting Block INSTALLATION: Face can be cut to adapt to requirement of fixture. Can be installed directly over electrical fixture or receptacle for correct placement. FEATURES: Mounting surface dimension of: ?”x?”. Decorative scalloped corners on trim ring. Provides smooth mounting surface for fixtures installed with siding. Eliminates unsightly caulking around electrical receptacles. Eliminates time consuming trimming around electrical receptacles. Incorporates several cut out groves on back of face to allow easy adaptation to desired fixture. Adjustable Snap-on Trim ring covers rough edge of siding. Conforms to siding with projections up to ???”. ]]>

MGA-120

Fri, 16 Dec 2011 11:59:56 GMT

Date:Fri, 16 Dec 2011 11:59:56 GMT
Album Category:Gable Accents/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: MGA-120 PACKAGED: 1 per box SIZES: Pitches from 6/12 to 16/12 Base widths from 36” to 120” INSTALLATION: Designed to be mounted at underside of fascia board. FEATURES: Cellular PVC Material. Maintenance Free. Will not absorb moisture or rot. Can be glued, screwed, drilled, cut and routed similar to pine. Designs and options for specific installation requirements. Custom colours available via Valor Custom paint shop.]]>

MGA-150

Fri, 16 Dec 2011 11:59:59 GMT

Date:Fri, 16 Dec 2011 11:59:59 GMT
Album Category:Gable Accents/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: MGA-150 PACKAGED: 1 per box SIZES: Pitches from 6/12 to 16/12 Base widths from 36” to 120” INSTALLATION: Designed to be mounted at underside of fascia board. FEATURES: Cellular PVC Material. Maintenance Free. Will not absorb moisture or rot. Can be glued, screwed, drilled, cut and routed similar to pine. Designs and options for specific installation requirements. Custom colours available via Valor Custom paint shop.]]>

MGA-510

Fri, 16 Dec 2011 12:00:00 GMT

Date:Fri, 16 Dec 2011 12:00:00 GMT
Album Category:Gable Accents/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: MGA-510 PACKAGED: 1 per box SIZES: Pitches fro 6/12 to 16/12 Base widths from 36” to 168” D100'>INSTALLATION: Some framing may be required to support the weight of this item. Although standard designs exist, these items are often produced to specific installation requirements. Consultation with our technical team should take place to review product criteria. FEATURES: Rigid Polyurethane materials. Maintenance Free. Will not absorb moisture or rot. Can be glued, screwed, drilled, cut and routed similar to pine. Custom machined to exacting standards. Often produced with internal PVC elements for joinery and/or additional strength. Laminated up to several inches thick. Designed with traditional Post & Beam construction for ease of shipping, installation, and greater strength. 3” Polyurethane Ball. Designs and options for specific installation requirements. Custom colours available via Valor Custom paint shop. ]]>

MGA-135

Fri, 16 Dec 2011 11:59:59 GMT

Date:Fri, 16 Dec 2011 11:59:59 GMT
Album Category:Gable Accents/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: MGA-135 PACKAGED: 1 per box SIZES: Pitches from 6/12 to 16/12 Base widths from 36” to 120” INSTALLATION: Designed to be mounted at underside of fascia board FEATURES: Cellular PVC Material. Maintenance Free. Will not absorb moisture or rot. Can be glued, screwed, drilled, cut and routed similar to pine. Designs and options for specific installation requirements. Custom colours available via Valor Custom paint shop.]]>

MGA-130

Fri, 16 Dec 2011 11:59:58 GMT

Date:Fri, 16 Dec 2011 11:59:58 GMT
Album Category:Gable Accents/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: MGA-130 PACKAGED: 1 per box SIZES: Pitches from 6/12 to 16/12 Base widths from 36” to 120” D100'>INSTALLATION: Designed to be mounted at underside of fascia board FEATURES: Cellular PVC Material. Maintenance Free. Will not absorb moisture or rot. Can be glued, screwed, drilled, cut and routed similar to pine. Designs and options for specific installation requirements. Custom colours available via Valor Custom paint shop.]]>

MGA-125

Fri, 16 Dec 2011 11:59:58 GMT

Date:Fri, 16 Dec 2011 11:59:58 GMT
Album Category:Gable Accents/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: MGA-125 PACKAGED: 1 per box SIZES: Pitches from 6/12 to 16/12 Base widths from 36” to 120” INSTALLATION: Designed to be mounted at underside of fascia board FEATURES: Cellular PVC Material. Maintenance Free. Will not absorb moisture or rot. Can be glued, screwed, drilled, cut and routed similar to pine. Designs and options for specific installation requirements. Custom colours available via Valor Custom paint shop.]]>

MGA-110

Fri, 16 Dec 2011 11:59:56 GMT

Date:Fri, 16 Dec 2011 11:59:56 GMT
Album Category:Gable Accents/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: MGA-110 PACKAGED: 1 per box SIZES: Pitches from 6/12 to 16/12 Base widths from 36” to 120” INSTALLATION: Designed to face mounted FEATURES: Cellular PVC Material. Maintenance Free. Will not absorb moisture or rot. Can be glued, screwed, drilled, cut and routed similar to pine. Designs and options for specific installation requirements. Custom colours available via Valor Custom paint shop.]]>

GB77B

Fri, 16 Dec 2011 11:59:46 GMT

Date:Fri, 16 Dec 2011 11:59:46 GMT
Album Category:Brackets/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: n/a PACKAGED: 1 per box STYLES: PVC 3/4” Routed Material INSTALLATION: Can be installed by drilling and screwing through product. FEATURES: Routed from 3/4” thick PVC. Will not rot. Lightweight yet strong part. Can be glued and /or screwed.]]>

GB75B

Fri, 16 Dec 2011 11:59:45 GMT

Date:Fri, 16 Dec 2011 11:59:45 GMT
Album Category:Brackets/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: n/a PACKAGED: 1 per box STYLES: PVC 3/4” Routed Material INSTALLATION: Can be installed by drilling and screwing through product. FEATURES: Routed from 3/4” thick PVC. Will not rot. Lightweight yet strong part. Can be glued and /or screwed.]]>

GS1

Fri, 16 Dec 2011 11:59:46 GMT

Date:Fri, 16 Dec 2011 11:59:46 GMT
Album Category:Brackets/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: n/a PACKAGED: 1 per box STYLES: PVC 1” Routed Material INSTALLATION: Can be installed by drilling and screwing through product. FEATURES: Routed from 1” thick PVC. Will not rot. Lightweight yet strong part. Can be glued and /or screwed.]]>

GS2

Fri, 16 Dec 2011 11:59:47 GMT

Date:Fri, 16 Dec 2011 11:59:47 GMT
Album Category:Brackets/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: n/a PACKAGED: 1 per box STYLES: PVC 1” Routed Material INSTALLATION: Can be installed by drilling and screwing through product. FEATURES: Routed from 1” thick PVC. Will not rot. Lightweight yet strong part. Can be glued and /or screwed.]]>

GS3

Fri, 16 Dec 2011 11:59:47 GMT

GB55B

Fri, 16 Dec 2011 11:59:45 GMT

GB54B

Fri, 16 Dec 2011 11:59:44 GMT

Date:Fri, 16 Dec 2011 11:59:44 GMT
Album Category:Brackets/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: n/a PACKAGED: 1 per box STYLES: PVC 3/4” Routed Material INSTALLATION: Can be installed by drilling and screwing through product. FEATURES: Routed from 3/4” thick PVC. Will not rot. Lightweight yet strong part. Can be glued and /or screwed.]]>

GB3

Fri, 16 Dec 2011 11:59:42 GMT

Date:Fri, 16 Dec 2011 11:59:42 GMT
Album Category:Brackets/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: n/a PACKAGED: 1 per box STYLES: PVC 3/4” Routed Material INSTALLATION: Can be installed by drilling and screwing through product. FEATURES: Routed from 3/4” thick PVC. Will not rot. Lightweight yet strong part. Can be glued and /or screwed. ]]>

GB3307A

Fri, 16 Dec 2011 11:59:43 GMT

Date:Fri, 16 Dec 2011 11:59:43 GMT
Album Category:Brackets/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: n/a PACKAGED: 1 per box STYLES: PVC 3/4” Routed Material INSTALLATION: Can be installed by drilling and screwing through product. FEATURES: Routed from 3/4” thick PVC. Will not rot. Lightweight yet strong part. Can be glued and /or screwed. ]]>

GB51B

Fri, 16 Dec 2011 11:59:43 GMT

Beadboard

Fri, 16 Dec 2011 12:00:40 GMT

Date:Fri, 16 Dec 2011 12:00:40 GMT
Album Category:Trimboards/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: ? PACKAGED: Bundle Qty: Pallet Qty: STYLES: PVC Beadboard Panels SIZES: Most Common Stock: 1/2” x 5-1/2” x 144” Call for availability in other widths & lengths. Other sizes are often stocked for specific projects, please consult us. Valor can custom produce wide fluted Corners & similar elements. INSTALLATION: PVC Sheet/Beadborad can be glued, screwed, or air nailed. Can be drilled and routed much like pine. When surface mouting boards is is important to ensure it is fastened every 12” to avoid potential warping. Paint with an acrylic paint, extremely dark colours are not recommended unless professionally coated with heat reflective paints. FEATURES: PVC Beadboard are maintenance free product and in is white form is will not be affected by UV rays. Does not have to be painted. Will not absorb moisture or rot. Can be glued, screwed, air nailed, drilled, and routed much like pine. Manufactured with a miter joint for greater strength. Valor can custom manufacture virtually any decorative elements to compliment trim boards on any home. Panels have a breaded panel profile on one side and a V-Groove profile on the opposite. Panels are produced with a T& G joint for easy installation as soffit or any siding application. ]]>

Pre-Fabricated Outside Corner

Fri, 16 Dec 2011 12:00:41 GMT

Date:Fri, 16 Dec 2011 12:00:41 GMT
Album Category:Trimboards/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: ? PACKAGED: Bundle Qty: Pallet Qty: STYLES: PVC Pre-Fabricated Corners SIZES: Most Common Stock: 5/8” x 3-1/2” x 120” 5/8” x 5-1/2” x 120” 3/4” x 3-1/2” x 144” 3/4” x 5-1/2” x 144” Call for availability in other widths & lengths. Other sizes are often stocked for specific projects, please consult us. Valor can custom produce wide fluted Corners & similar elements. INSTALLATION: PVC Corners can be glued, screwed, or air nailed. Can be drilled and routed much like pine. When surface mouting boards is is important to ensure it is fastened every 12” to avoid potential warping. Paint with an acrylic paint, extremely dark colours are not recommended unless professionally coated with heat reflective paints. FEATURES: PVC Corners are maintenance free product and in is white form is will not be affected by UV rays. Does not have to be painted. Will not absorb moisture or rot. Can be glued, screwed, air nailed, drilled, and routed much like pine. Valor can custom manufacture virtually any decorative elements to compliment trim boards on any home. ]]>

Sheet Stock

Fri, 16 Dec 2011 12:00:41 GMT

Date:Fri, 16 Dec 2011 12:00:41 GMT
Album Category:Trimboards/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: VTB-075 VTB-075 VTB-075 VTB-075 PACKAGED: 1-piece Bundle Qty: Pallet Qty: STYLES: PVC Trimboard - Smooth & Woodgrain Surfaces SIZES: Most Common Stock: 3/4” x 3-1/2” x 12’ 3/4” x 5-1/2” x 12’ 3/4” x 7-1/4” x 12’ 3/4” x 9-1/4” x 12’ 3/4” x 11-1/4” x 12’ Check for availability of other sizes. Other sizes are often stocked for specific projects, please consult us. INSTALLATION: PVC Trimborad can be glued, screwed, or air nailed. Can be drilled and routed much like pine. When surface mouting boards is is important to ensure it is fastened every 12” to avoid potential warping. Paint with an acrylic paint, extremely dark colours are not recommended unless professionally coated with heat reflective paints. FEATURES: PVC Trimboard is a maintenance free product and in is white form is will not be affected by UV rays. Does not have to be painted. Will not absorb moisture or rot. Can be glued, screwed, air nailed, drilled, and routed much like pine. Valor can custom manufacture virtually any decorative elements to compliment trim boards on any home. ]]>

Trimboard

Fri, 16 Dec 2011 12:00:42 GMT

Date:Fri, 16 Dec 2011 12:00:42 GMT
Album Category:Trimboards/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: VTB-075 VTB-075 VTB-075 VTB-075 PACKAGED: 1-piece Bundle Qty: Pallet Qty: STYLES: PVC Trimboard - Smooth & Woodgrain Surfaces SIZES: Most Common Stock: 3/4” x 3-1/2” x 12’ 3/4” x 5-1/2” x 12’ 3/4” x 7-1/4” x 12’ 3/4” x 9-1/4” x 12’ 3/4” x 11-1/4” x 12’ Check for availability of other sizes. Other sizes are often stocked for specific projects, please consult us. INSTALLATION: PVC Trimborad can be glued, screwed, or air nailed. Can be drilled and routed much like pine. When surface mouting boards is is important to ensure it is fastened every 12” to avoid potential warping. Paint with an acrylic paint, extremely dark colours are not recommended unless professionally coated with heat reflective paints. FEATURES: PVC Trimboard is a maintenance free product and in is white form is will not be affected by UV rays. Does not have to be painted. Will not absorb moisture or rot. Can be glued, screwed, air nailed, drilled, and routed much like pine. Valor can custom manufacture virtually any decorative elements to compliment trim boards on any home. ]]>

Sunburst - Elliptical

Fri, 16 Dec 2011 12:00:38 GMT

Date:Fri, 16 Dec 2011 12:00:38 GMT
Album Category:Sunbursts/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: EXSB65 EXSB73 PACKAGED: 1 per box STYLES: Moulded Sunburst SIZES: 14” x 65-5/8” Elliptical Sunburst 15” x 73-5/8” Elliptical Sunburst INSTALLATION: Has Nail fin for installation prior to siding installation. Nail fin is fully covered by Extra wide trim ring for clean Surface mounting. FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. Removeable siding trim ring, acts as a template to aid siding cuts, and trim rough edge of siding. Easy to install features. Moulded in levelling lines allow correct straight installation. Product can be installed without trim ring if desired. ]]>

Sunburst - Half Round

Fri, 16 Dec 2011 12:00:39 GMT

Date:Fri, 16 Dec 2011 12:00:39 GMT
Album Category:Sunbursts/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT NAME: EXSB33 EXSB37 EXSB43 PACKAGED: 1 per box STYLES: Moulded Sunburst SIZES: 33” Half Round Sunburst 33” Half Round Sunburst 33” Half Round Sunburst INSTALLATION: Has Nail fin for installation prior to siding installation. Nail fin is fully covered by Extra wide trim ring for clean Surface mounting. FEATURES: Non-paintable product is injection moulded polypropylene. Paintable product is moulded in polystyrene. Removeable siding trim ring, acts as a template to aid siding cuts, and trim rough edge of siding. Easy to install features. Moulded in levelling lines allow correct straight installation. Product can be installed without trim ring if desired. ]]>

qtr_panel

Fri, 16 Dec 2011 12:00:38 GMT

Date:Fri, 16 Dec 2011 12:00:38 GMT
Album Category:Shutters/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: SHVX PRODUCT NAME: Valor Shutter Accessory - Quarter Round Top-Panel PACKAGED: 1 pair per box, priced per pair. STYLES: Quarter Round Top - Panel 14.5” x 17”H SIZES: For 14.50” Width Panel Shutter Only 17.00” Height INSTALLATION: As polypropyleneshutters will expand and contract with temperature variation it is important not to install in any opening tightly. Do not sit directly on window sill. Standard fastener is a 2-1/2” zinc coated screw, with colour matched plastic cap. Use a #8-10 Plastic anchor when installing in masonry material. Option plastic shutter lock fastener available. FEATURES: Deep woodgrain texture. One piece injection moulded construction. Colour moulded clear through. No paint to chip or flake. Paintable product available to take DIY paint. Custom colours available via Valor custom paint shop. 40 Year Limited Warranty, on coloured product. ]]>

D2 douLouver Over Panel - Straight Top

Fri, 16 Dec 2011 12:00:18 GMT

Date:Fri, 16 Dec 2011 12:00:18 GMT
Album Category:Shutters/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: SHV-D PRODUCT NAME: Valor Shutter Style Series D PACKAGED: 1 pair per box, priced per pair. STYLES: D2 Louver Double Wide Shutter, Arch Top, w/ Centre Bar SIZES: Lengths: Min. - 18” Max-144” Standard Widths: 20.25", 25.5", 29.5", 31" Premium Widths: INSTALLATION: As polypropyleneshutters will expand and contract with temperature variation it is important not to install in any opening tightly. Do not sit directly on window sill. Standard fastener is a 2-1/2” zinc coated screw, with colour matched plastic cap. Use a #8-10 Plastic anchor when installing in masonry material. Option plastic shutter lock fastener available. FEATURES: Deep woodgrain texture. Elegant beaded detailing. Authentic open louver design. Can be custom made to the ¼”. Colour moulded clear through. No paint to chip or flake. Paintable product available to take DIY paint. Custom colours available via Valor custom paint shop. 40 Year Limited Warranty, on coloured product. ]]>

D1 doubleLouver Over Panel - Arch Top

Fri, 16 Dec 2011 12:00:17 GMT

Date:Fri, 16 Dec 2011 12:00:17 GMT
Album Category:Shutters/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: SHV-D PRODUCT NAME: Valor Shutter Style Series D PACKAGED: 1 pair per box, priced per pair. STYLES: D1 Louver Double Wide Shutter, Arch Top, w/ Centre Bar SIZES: Lengths: Min. - 18” Max-144” Standard Widths: 20.25", 25.5", 29.5", 31" Premium Widths: INSTALLATION: As polypropyleneshutters will expand and contract with temperature variation it is important not to install in any opening tightly. Do not sit directly on window sill. Standard fastener is a 2-1/2” zinc coated screw, with colour matched plastic cap. Use a #8-10 Plastic anchor when installing in masonry material. Option plastic shutter lock fastener available. FEATURES: Deep woodgrain texture. Elegant beaded detailing. Authentic open louver design. Can be custom made to the ¼”. Colour moulded clear through. No paint to chip or flake. Paintable product available to take DIY paint. Custom colours available via Valor custom paint shop. 40 Year Limited Warranty, on coloured product. ]]>

Board & Batten - 5 Board Spaced

Fri, 16 Dec 2011 12:00:34 GMT

Date:Fri, 16 Dec 2011 12:00:34 GMT
Album Category:Shutters/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: SHV-L PRODUCT NAME: Valor Shutter Style Series L PACKAGED: 1 pair per box, priced per pair. STYLES: L1-Board & Batton Shutter, 5-Board Spaced SIZES: Lengths: Min. - 33”, Max - 144” Standard Widths: 7.75", 12", 16.25", 20.5” Premium Widths: INSTALLATION: As polypropyleneshutters will expand and contract with temperature variation it is important not to install in any opening tightly. Do not sit directly on window sill. Standard fastener is a 2-1/2” zinc coated screw, with colour matched plastic cap. Use a #8-10 Plastic anchor when installing in masonry material. Option plastic shutter lock fastener available. FEATURES: Deep woodgrain texture. Wide 3.5” wide boards. All welded construction. Can be custom made to the 1/4”. 3/4” space between boards. Shutters 55” and longer have additional batton in the centre of the shutter. Colour moulded clear through. No paint to chip or flake. Paintable product available to take DIY paint. Custom colours available via Valor custom paint shop. 40 Year Limited Warranty, on coloured product. ]]>

Board & Batten - 2 Board Joined

Fri, 16 Dec 2011 12:00:34 GMT

Date:Fri, 16 Dec 2011 12:00:34 GMT
Album Category:Shutters/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: SHV-M PRODUCT NAME: Valor Shutter Style Series M PACKAGED: 1 pair per box, priced per pair. STYLES: M1-Board & Batton Shutter, 2-Board Joined SIZES: Lengths: Min. - 33”, Max - 144” Standard Widths: 7", 10.5", 14", 17.5" Premium Widths: INSTALLATION: As polypropyleneshutters will expand and contract with temperature variation it is important not to install in any opening tightly. Do not sit directly on window sill. Standard fastener is a 2-1/2” zinc coated screw, with colour matched plastic cap. Use a #8-10 Plastic anchor when installing in masonry material. Option plastic shutter lock fastener available. FEATURES: Deep woodgrain texture. Wide 3.5” wide boards. All welded construction. Can be custom made to the ¼”. Shutters 55” and longer have additional batton in the centre of the shutter. Colour moulded clear through. No paint to chip or flake. Paintable product available to take DIY paint. Custom colours available via Valor custom paint shop. 40 Year Limited Warranty, on coloured product. ]]>

Board & Batten - 4 Board Spaced

Fri, 16 Dec 2011 12:00:32 GMT

Date:Fri, 16 Dec 2011 12:00:32 GMT
Album Category:Shutters/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: SHV-L PRODUCT NAME: Valor Shutter Style Series L PACKAGED: 1 pair per box, priced per pair. STYLES: L1-Board & Batton Shutter, 4-Board Spaced SIZES: Lengths: Min. - 33”, Max - 144” Standard Widths: 7.75", 12", 16.25", 20.5” Premium Widths: INSTALLATION: As polypropyleneshutters will expand and contract with temperature variation it is important not to install in any opening tightly. Do not sit directly on window sill. Standard fastener is a 2-1/2” zinc coated screw, with colour matched plastic cap. Use a #8-10 Plastic anchor when installing in masonry material. Option plastic shutter lock fastener available. FEATURES: Deep woodgrain texture. Wide 3.5” wide boards. All welded construction. Can be custom made to the 1/4”. 3/4” space between boards. Shutters 55” and longer have additional batton in the centre of the shutter. Colour moulded clear through. No paint to chip or flake. Paintable product available to take DIY paint. Custom colours available via Valor custom paint shop. 40 Year Limited Warranty, on coloured product. ]]>

Board & Batten - 3 Board Spaced

Fri, 16 Dec 2011 12:00:32 GMT

Date:Fri, 16 Dec 2011 12:00:32 GMT
Album Category:Shutters/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: SHV-L PRODUCT NAME: Valor Shutter Style Series L PACKAGED: 1 pair per box, priced per pair. STYLES: L1-Board & Batton Shutter, 3-Board Spaced SIZES: Lengths: Min. - 33”, Max - 144” Standard Widths: 7.75", 12", 16.25", 20.5” Premium Widths: INSTALLATION: As polypropyleneshutters will expand and contract with temperature variation it is important not to install in any opening tightly. Do not sit directly on window sill. Standard fastener is a 2-1/2” zinc coated screw, with colour matched plastic cap. Use a #8-10 Plastic anchor when installing in masonry material. Option plastic shutter lock fastener available. FEATURES: Deep woodgrain texture. Wide 3.5” wide boards. All welded construction. Can be custom made to the 1/4”. 3/4” space between boards. Shutters 55” and longer have additional batton in the centre of the shutter. Colour moulded clear through. No paint to chip or flake. Paintable product available to take DIY paint. Custom colours available via Valor custom paint shop. 40 Year Limited Warranty, on coloured product. ]]>

Double Wide Three Panel - Smaller Top Panel

Fri, 16 Dec 2011 12:00:30 GMT

Date:Fri, 16 Dec 2011 12:00:30 GMT
Album Category:Shutters/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: SHV-K PRODUCT NAME: Valor Shutter Style Series K PACKAGED: 1 pair per box, priced per pair. STYLES: K3 Three Panel Shutter, Straight Top, w/ 2-Centre Bars SIZES: Lengths: Min. - 33”, Max - 144” Standard Widths: 9.25”, 12.00”, 14.50” Premium Widths: 16.50”, 18.00” INSTALLATION: As polypropyleneshutters will expand and contract with temperature variation it is important not to install in any opening tightly. Do not sit directly on window sill. Standard fastener is a 2-1/2” zinc coated screw, with colour matched plastic cap. Use a #8-10 Plastic anchor when installing in masonry material. Option plastic shutter lock fastener available. FEATURES: Deep woodgrain texture. Elegant beaded detailing. Authentic open louver design. Can be custom made to the ¼”. Colour moulded clear through. No paint to chip or flake. Paintable product available to take DIY paint. Custom colours available via Valor custom paint shop. 40 Year Limited Warranty, on coloured product. ]]>

Board & Batten - 2 Board Spaced

Fri, 16 Dec 2011 12:00:31 GMT

Date:Fri, 16 Dec 2011 12:00:31 GMT
Album Category:Shutters/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: SHV-L PRODUCT NAME: Valor Shutter Style Series L PACKAGED: 1 pair per box, priced per pair. 0'>STYLES: L1-Board & Batton Shutter, 2-Board Spaced SIZES: Lengths: Min. - 33”, Max - 144” Standard Widths: 7.75", 12", 16.25", 20.5” Premium Widths: INSTALLATION: As polypropyleneshutters will expand and contract with temperature variation it is important not to install in any opening tightly. Do not sit directly on window sill. Standard fastener is a 2-1/2” zinc coated screw, with colour matched plastic cap. Use a #8-10 Plastic anchor when installing in masonry material. Option plastic shutter lock fastener available. FEATURES: Deep woodgrain texture. Wide 3.5” wide boards. All welded construction. Can be custom made to the 1/4”. 3/4” space between boards. Shutters 55” and longer have additional batton in the centre of the shutter. Colour moulded clear through. No paint to chip or flake. Paintable product available to take DIY paint. Custom colours available via Valor custom paint shop. 40 Year Limited Warranty, on coloured product. ]]>

Board & Batten - 3 Board Joined

Fri, 16 Dec 2011 12:00:35 GMT

Date:Fri, 16 Dec 2011 12:00:35 GMT
Album Category:Shutters/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: SHV-M PRODUCT NAME: Valor Shutter Style Series M PACKAGED: 1 pair per box, priced per pair. STYLES: M1-Board & Batton Shutter, 3-Board Joined SIZES: Lengths: Min. - 33”, Max - 144” Standard Widths: 7", 10.5", 14", 17.5" Premium Widths: INSTALLATION: As polypropyleneshutters will expand and contract with temperature variation it is important not to install in any opening tightly. Do not sit directly on window sill. Standard fastener is a 2-1/2” zinc coated screw, with colour matched plastic cap. Use a #8-10 Plastic anchor when installing in masonry material. Option plastic shutter lock fastener available. FEATURES: Deep woodgrain texture. Wide 3.5” wide boards. All welded construction. Can be custom made to the ¼”. Shutters 55” and longer have additional batton in the centre of the shutter. Colour moulded clear through. No paint to chip or flake. Paintable product available to take DIY paint. Custom colours available via Valor custom paint shop. 40 Year Limited Warranty, on coloured product. ]]>

End Caps

Fri, 16 Dec 2011 11:59:55 GMT

Date:Fri, 16 Dec 2011 11:59:55 GMT
Album Category:Dentil Moulding/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: n/a PACKAGED: n/a STYLES: Polypropylene, Dentil moulding End Cap piece SIZES: See above INSTALLATION: Installs directly over siding material. FEATURES: Polypropylene, injection moulded product. Sections have built-in receiving pocket for Dentil moulding. All concealed fastening. Bottom edge can receive top of Vinyl siding panel, or install directly over existing siding or masonry material.]]>

Outside Corner

Fri, 16 Dec 2011 11:59:53 GMT

Date:Fri, 16 Dec 2011 11:59:53 GMT
Album Category:Dentil Moulding/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: n/a PACKAGED: n/a STYLES: Polypropylene, Dentil moulding Outside Corner piece SIZES: See above INSTALLATION: Installs directly over siding material. FEATURES: Polypropylene, injection moulded product Sections have built-in receiving pocket for Dentil moulding. All concealed fastening. Bottom edge can receive top of Vinyl siding panel, or install directly over existing siding or masonry material.]]>

Inside Corner

Fri, 16 Dec 2011 11:59:53 GMT

Date:Fri, 16 Dec 2011 11:59:53 GMT
Album Category:Dentil Moulding/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: n/a PACKAGED: n/a STYLES: Polypropylene, Dentil moulding Inside Corner piece SIZES: See above INSTALLATION: Installs directly over siding material. FEATURES: Polypropylene, injection moulded product. Sections have built-in receiving pocket for Dentil moulding. All concealed fastening. Bottom edge can receive top of Vinyl siding panel, or install directly over existing siding or masonry material. ]]>

Scalloped Dentil Profile

Fri, 16 Dec 2011 11:59:54 GMT

Date:Fri, 16 Dec 2011 11:59:54 GMT
Album Category:Dentil Moulding/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: n/a PACKAGED: 8-pcs, 4-ft length, 32-ft per box STYLES: Polypropylene, Dentil moulding sections with Scalloped Tooth SIZES: See above INSTALLATION: Installs directly over siding material. FEATURES: Polypropylene, injection moulded product. Sections have built-in T&G joining system. All concealed fastening. Bottom edge can receive top of Vinyl siding panel, or install directly over existing siding or masonry material.]]>

Square Tooth Dentil Profile

Fri, 16 Dec 2011 11:59:54 GMT

Date:Fri, 16 Dec 2011 11:59:54 GMT
Album Category:Dentil Moulding/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: n/a PACKAGED: 8-pcs, 4-ft length, 32-ft per box STYLES: Polypropylene, Dentil moulding sections with Square Tooth SIZES: See above INSTALLATION: Installs directly over siding material. FEATURES: Polypropylene, injection moulded product. Sections have built-in T&G joining system. All concealed fastening. Bottom edge can receive top of Vinyl siding panel, or install directly over existing siding or masonry material. ]]>

Marine Blue

Fri, 16 Dec 2011 12:02:39 GMT

Date:Fri, 16 Dec 2011 12:02:39 GMT
Album Category:Retractable Awnings/Window/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: W005 PACKAGED: 1 unit per box (fabric separate) STYLES: WIDTHS PROJECTION 36" 28" 48" 28" 60" 28" 72" 28" 96" 28" 60" 48" 72" 48" 96" 48" INSTALLATION: Polyester fabric ships fully installed on your window awning. No assembly or installation is necessary. FEATURES: Fabric is 300g polyester with a polyurethane coating to resist mould. ]]>

Black

Fri, 16 Dec 2011 12:02:34 GMT

Date:Fri, 16 Dec 2011 12:02:34 GMT
Album Category:Retractable Awnings/Window/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: W006 PACKAGED: 1 unit per box (fabric separate) STYLES: WIDTHS PROJECTION 36" 28" 48" 28" 60" 28" 72" 28" 96" 28" 60" 48" 72" 48" 96" 48" INSTALLATION: Polyester fabric ships fully installed on your window awning. No assembly or installation is necessary. FEATURES: Fabric is 300g polyester with a polyurethane coating to resist mould. ]]>

Forest Green

Fri, 16 Dec 2011 12:02:37 GMT

Date:Fri, 16 Dec 2011 12:02:37 GMT
Album Category:Retractable Awnings/Window/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: W004 PACKAGED: 1 unit per box (fabric separate) STYLES: WIDTHS PROJECTION 36" 28" 48" 28" 60" 28" 72" 28" 96" 28" 60" 48" 72" 48" 96" 48" INSTALLATION: Polyester fabric ships fully installed on your window awning. No assembly or installation is necessary. FEATURES: Fabric is 300g polyester with a polyurethane coating to resist mould. ]]>

Burgundy

Fri, 16 Dec 2011 12:02:35 GMT

Date:Fri, 16 Dec 2011 12:02:35 GMT
Album Category:Retractable Awnings/Window/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: W003 PACKAGED: 1 unit per box (fabric separate) STYLES: WIDTHS PROJECTION 36" 28" 48" 28" 60" 28" 72" 28" 96" 28" 60" 48" 72" 48" 96" 48" INSTALLATION: Polyester fabric ships fully installed on your window awning. No assembly or installation is necessary. FEATURES: Fabric is 300g polyester with a polyurethane coating to resist mould. ]]>

Linen

Fri, 16 Dec 2011 12:02:38 GMT

Date:Fri, 16 Dec 2011 12:02:38 GMT
Album Category:Retractable Awnings/Window/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: W001 PACKAGED: 1 unit per box (fabric separate) STYLES: WIDTHS PROJECTION 36" 28" 48" 28" 60" 28" 72" 28" 96" 28" 60" 48" 72" 48" 96" 48" INSTALLATION: Polyester fabric ships fully installed on your window awning. No assembly or installation is necessary. FEATURES: Fabric is 300g polyester with a polyurethane coating to resist mould. ]]>

Cadet Grey

Fri, 16 Dec 2011 12:02:36 GMT

Date:Fri, 16 Dec 2011 12:02:36 GMT
Album Category:Retractable Awnings/Window/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: W002 PACKAGED: 1 unit per box (fabric separate) STYLES: WIDTHS PROJECTION 36" 28" 48" 28" 60" 28" 72" 28" 96" 28" 60" 48" 72" 48" 96" 48" INSTALLATION: Polyester fabric ships fully installed on your window awning. No assembly or installation is necessary. FEATURES: Fabric is 300g polyester with a polyurethane coating to resist mould. ]]>

Window Awning

Fri, 16 Dec 2011 12:02:40 GMT

Date:Fri, 16 Dec 2011 12:02:40 GMT
Album Category:Retractable Awnings/Window/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: AW102836 AW102848 AW102860 AW102872 AW102896 AW104860 AW104872 AW104896 PACKAGED: 1 unit per box (fabric separate) STYLES: WIDTHS PROJECTION 36" 28" 48" 28" 60" 28" 72" 28" 96" 28" 60" 48" 72" 48" 96" 48" INSTALLATION: Unique right and Left mounting plates are installed on the wall, which receives the entire awning. Drop arms are installed below the hooded awning body. FEATURES: Fabric is 300g polyester with a polyurethane coating to resist mould. ]]>

Patio Awning

Fri, 16 Dec 2011 12:02:32 GMT

Date:Fri, 16 Dec 2011 12:02:32 GMT
Album Category:Retractable Awnings/Patio/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: AP100810 AP101012 AP101014 AP101016 PACKAGED: 1 unit per box (fabric separate) STYLES: WIDTHS PROJECTION 10’ 8’ 12’ 10’ 14’ 10’ 16’ 10’ Four patterns available in all sizes above. INSTALLATION: Unique Modular construction makes these awnings easy to transport. Assembly is required; its level of difficulty is rated a 4, on a scale of 1-5, 5 being most difficult. Header Boards are often required to provide a smooth straight surface for correct installation and is rated about. Check the patio awning section of our website for downloadable assembly and installation instructions. FEATURES: Modular Construction reduces transportation costs. Product it constructed almost entirely of aluminum parts Minimal steel components used only where added strength is required. Majority of nuts and bolts are stainless steel to keep the awning looking great for years. 1:11 ratio manual crank gear box is included for minimal operational effort. Gear box can be moved from Left to Right side when assembled to suit your needs. 160cm crank arm is included to all operation of awning installed at elevated heights. Awning pitch is adjustable from 45 degree downward angle to 90 degree (perpendicular to the wall). Awning fabric is polyester and coated to resist mould. 5 Year Warranty on hardware. ]]>

P104

Fri, 16 Dec 2011 12:02:32 GMT

Date:Fri, 16 Dec 2011 12:02:32 GMT
Album Category:Retractable Awnings/Patio/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: P104 PACKAGED: WIDTHS PROJECTION 10’ 8’ 12’ 10’ 14’ 10’ 16’ 10’ STYLES: Choice of 4 complimentary patterns. INSTALLATION: Polyester fabric is installed during the awning assembly process. Fabric can be replaced if necessary. FEATURES: Fabric is 300g polyester with a polyurethane coating to resist mould.]]>

P103

Fri, 16 Dec 2011 12:02:28 GMT

Date:Fri, 16 Dec 2011 12:02:28 GMT
Album Category:Retractable Awnings/Patio/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: P103 PACKAGED: WIDTHS PROJECTION 10’ 8’ 12’ 10’ 14’ 10’ 16’ 10’ STYLES: Choice of 4 complimentary patterns. INSTALLATION: Polyester fabric is installed during the awning assembly process. Fabric can be replaced if necessary. FEATURES: Fabric is 300g polyester with a polyurethane coating to resist mould.]]>

P102

Fri, 16 Dec 2011 12:02:24 GMT

Date:Fri, 16 Dec 2011 12:02:24 GMT
Album Category:Retractable Awnings/Patio/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: P102 PACKAGED: WIDTHS PROJECTION 10’ 8’ 12’ 10’ 14’ 10’ 16’ 10’ STYLES: Choice of 4 complimentary patterns. INSTALLATION: Polyester fabric is installed during the awning assembly process. Fabric can be replaced if necessary. FEATURES: Fabric is 300g polyester with a polyurethane coating to resist mould.]]>

P101

Fri, 16 Dec 2011 12:02:28 GMT

Date:Fri, 16 Dec 2011 12:02:28 GMT
Album Category:Retractable Awnings/Patio/
Click here to view album containing this image.
Description: SPECIFICATIONS: PRODUCT CODE: P101 PACKAGED: WIDTHS PROJECTION 10’ 8’ 12’ 10’ 14’ 10’ 16’ 10’ STYLES: Choice of 4 complimentary patterns. INSTALLATION: Polyester fabric is installed during the awning assembly process. Fabric can be replaced if necessary. FEATURES: Fabric is 300g polyester with a polyurethane coating to resist mould.]]>